Main Page Feedback NirSoft Utilities
Windows XP DLL File Information - ipxpromn.dll

The following DLL report was generated by automatic DLL script that scanned and loaded all DLL files in the system32 directory of Windows XP, extracted the information from them, and then saved it into HTML reports. If you want to view a report of another DLL, go to the main page of this Web site.

 

General Information

File Description: IPX Router Monitor DLL  
File Version: 5.1.2600.0 (xpclient.010817-1148)  
Company: Microsoft Corporation  
Product Name: Microsoft Windows Operating System  
DLL popularity Very Low - There is no any other DLL in system32 directory that is statically linked to this file.
File Size: 67 KB
Total Number of Exported Functions: 1
Total Number of Exported Functions With Names: 1
 

Section Headers

Name Virtual Address Raw Data Size % of File Characteristics Section Contains...
.text 0x00001000 33,792 Bytes 48.9% Read, Execute Code
.data 0x0000a000 1,536 Bytes 2.2% Write, Read Initialized Data
.rsrc 0x0000b000 30,208 Bytes 43.7% Read Initialized Data
.reloc 0x00013000 2,560 Bytes 3.7% Read, Discardable Initialized Data
 

Static Linking

ipxpromn.dll is statically linked to the following files:

msvcrt.dll
IPMONTR.dll
KERNEL32.dll
MPRAPI.dll
NETSH.EXE

This means that when ipxpromn.dll is loaded, the above files are automatically loaded too. If one of these files is corrupted or missing, ipxpromn.dll won't be loaded.

 

General Resources Information

Resource Type Number of Items Total Size % of File
Icons 0 0 Bytes 0.0%
Animated Icons 0 0 Bytes 0.0%
Cursors 0 0 Bytes 0.0%
Animated Cursors 0 0 Bytes 0.0%
Bitmaps 0 0 Bytes 0.0%
AVI Files 0 0 Bytes 0.0%
Dialog-Boxes 0 0 Bytes 0.0%
HTML Related Files 0 0 Bytes 0.0%
Menus 0 0 Bytes 0.0%
Strings 29 8,844 Bytes 12.8%
Type Libraries 0 0 Bytes 0.0%
Manifest 0 0 Bytes 0.0%
All Others 2 20,392 Bytes 29.5%
Total 31 29,236 Bytes 42.3%
 

Icons in this file

No icons found in this file

 

Cursors in this file

No cursors found in this file

 

Dialog-boxes list (up to 200 dialogs)

No dialog resources in this file.

 

String resources in this dll (up to 200 strings)

String ID String Text
1400 Object INTERFACE is used to configure and monitor RIP interfaces. Command syntax: SHOW INTERFACE [ifname] SET INTERFACE ifname [[ADMSTATE= ] admstate] [[ADVERTISE=] admstate] [[LISTEN= ] admstate] [[UPDATEMODE=] updmode] [[INTERVAL=] updint] [[AGEMULTIPLIER=] mult] Where: ifname - name of the interface (use Dial-In for RAS clients). admstate - ENABLED or DISABLED. updmode - STANDARD, NONE, or AUTOSTATIC. updint - update interval in seconds. mult - route aging multiplier.
1401 Object INTERFACE is used to configure and monitor SAP interfaces. Command syntax: SHOW INTERFACE [ifname] SET INTERFACE ifname [[ADMSTATE= ] admstate] [[ADVERTISE=] admstate] [[LISTEN= ] admstate] [[GNSREPLY= ] admstate] [[UPDATEMODE=] updmode] [[INTERVAL=] updint] [[AGEMULTIPLIER=] mult] Where: ifname - name of the interface (use Dial-In for RAS clients). admstate - ENABLED or DISABLED. updmode - STANDARD, NONE, or AUTOSTATIC. updint - update interval in seconds. mult - service aging multiplier.
1402 Object INTERFACE is used to configure propagation of NBIPX broadcasts and to monitor NBIPX traffic on router interfaces. Command syntax: SHOW INTERFACE [ifname] SET INTERFACE ifname [[BCASTACCEPT=] accmode] [[BCASTDELIVER=] delmode] Where: ifname - name of the interface (use Dial-In for RAS clients). accnode - ENABLED or DISABLED. delmode - ENABLED, DISABLED, STATICONLY, ONLYWHENUP.
1403 Object NBNAME is used to configure static NETBIOS names on router interfaces. Command syntax: SHOW NBNAME ifname ADD NBNAME ifname nbname [nbtype] DELETE NBNAME ifname nbname [nbtype] Where: ifname - name of the interface. nbname - NETBIOS name. nbtype - 1-byte NETBIOS name type (up to 2 hex digits, leading 0's optional).
1404 Object FILTER is used to configure RIP filters on router interfaces. Command syntax: SHOW FILTER ifname [mode] ADD FILTER ifname mode net mask DELETE FILTER ifname mode net mask SET FILTER ifname mode action Where: ifname - name of the interface. mode - INPUT or OUTPUT. net - 4-byte network address (up to 8 hex digits, leading 0's optional). mask - 4-byte network mask (up to 8 hex digits, leading 0's optional). action - PERMIT or DENY.
1405 Object FILTER is used to configure SAP filters on router interfaces. Command syntax: SHOW FILTER ifname [mode] ADD FILTER ifname mode svtype svname DELETE FILTER ifname mode svtype svname SET FILTER ifname mode action Where: ifname - name of the interface. mode - INPUT or OUTPUT. svtype - 2-byte service type (up to 4 hex digits, leading 0's optional). svname - service name. action - PERMIT or DENY.
1406 Object GLOBAL is used to configure RIP global settings. Command syntax: SHOW GLOBAL SET GLOBAL [[LOGLEVEL=] level] Where: level - NONE, Errors_Only, Warnings_And_Errors, Maximum_Information.
1407 Object GLOBAL is used to configure SAP global settings. Command syntax: SHOW GLOBAL SET GLOBAL [[LOGLEVEL=] level] Where: level - NONE, Errors_Only, Warnings_And_Errors, Maximum_Information.
1595 Adds a configuration entry to a list of entries.
1596 Deletes a configuration entry from a list of entries.
1597 Sets configuration information.
1598 Displays configuration information.
1599 Dumps IPX protocol configuration to a text file.
1600 Display command help.
1601 Adds a protocol filter entry to the list of filters.
1602 Deletes a protocol filter entry from the list of filters.
1603 Updates a protocol filter entry in the list of filters.
1604 Displays the list of protocol filters.
1610 Updates the protocol configuration on an interface.
1611 Displays the protocol configuration on an interface.
1621 Updates the global protocol configuration.
1622 Displays the global protocol configuration.
1661 Adds a NETBIOS name to the list of NETBIOS names.
1662 Deletes a NETBIOS name from the list of NETBIOS names.
1663 Displays the list of NETBIOS names.
1681 %1!-14s! -
1682 %1!-20s! -
1701 Usage: %1!s! Remarks: Creates a script that contains the current configuration. If saved to a file, this script can be used to restore altered configuration settings.
1702 Usage: %1!s! Displays a list of commands.
 

COM Classes/Interfaces

There is no type library in this file with COM classes/interfaces information

 

Exported Functions List

The following functions are exported by this dll:
InitHelperDll

 

Imported Functions List

The following functions are imported by this dll: